Wheel Spinning Center Flex
Leifeld WSC Flex H Series
The LEIFELD WSC Flex Series is specially designed for the flexible production of cast or forged aluminium wheels for passenger cars. Different wheel contours, diameters and jaw widths can be produced on the machine without changing the spinning chuck. Optionally, the machine can also be equipped for chaotic production without manual setup.
The machine is available with different number of inside and outside rollers.
Main Characteristics
- No tooling is needed
- No time-consuming changeovers
- Maximum flexibility in wheel design
- Increased efficiency by a minimum of 15% and reduced costs
- Batch size one can be produced economically
Technical Data
LEIFELD WSC 700/4-1 H flex |
LEIFELD WSC 700/6-1 H flex |
|
---|---|---|
Outside diameter, min. | 410 mm | 410 mm |
Outside diameter, max. | 680 mm | 680 mm |
Nominal rim diameter, min. | 18 inch | 18 inch |
Nominal rim diameter, max. | 24 inch | 24 inch |
Rim width, max. | 14 inch | 14 inch |
Workpiece length, max. approx | 400 mm | 400 mm |
Number of inside rollers | 2 rollers | 3 rollers |
Number of outside rollers | 2 rollers | 3 rollers |
End products
- cast aluminium rims
- forged aluminium rims
- cast alumimium wheels
- forged aluminium wheels